Electronic Formulas

Doppler is the apparent change in wavelength (or frequency) of an electromagnetic or acoustic wave when there is relative movement between the transmitter (or frequency source) and the receiver.

Our world is an analog world. Measurements that we make of the physical objects around us are never in discrete units, but rather in a continuous range.

The field of design automation (DA) technology, also commonly called computer-aided design (CAD) or computer-aided engineering (CAE), involves developing computer programs to conduct portions of product design and manufacturing on behalf of the designer.

Development of an Observe-By-Wire System for Forklifts Using Haptic Interfaces

A detector is used in receiver circuits to recognize the presence of signals. Typically a diode or similar device is used as a detector.

This report describes work that I did on embedded control data communication using the domestic powerline circuitry as channel medium. A home automation system was implemented. In the modern home filled with electronic apparatus and appliances, it is useful for the owner to exercise some form of centralised control over the functions in the house. Currently, when the owner needs to turn on the driveway and living room lights before arming the alarm and going to bed, he has to walk to the garage, then to the front door, then to the alarm box, then to bed....

Design and Simulation of A CMOS-MEMS Accelerometer

The Decibel is a subunit of a larger unit called the bel. As originally used, the bel represented the power ratio of 10 to 1 between the strength or intensity i.e., power, of two sounds, and was named after Alexander Graham Bell. Thus a power ratio of 10:1 = 1 bel, 100:1 = 2 bels, and 1000:1 = 3 bels.

POWER DIVIDERS AND DIRECTIONAL COUPLERS

This Toolbox provides many functions that are useful in robotics including such things as kinematics, dynamics, and trajectory generation. The Toolbox is useful for simulation as well as analyzing results from experiments with real robots. The Toolbox has been developed and used over the last few years to the point where I now rarely write ‘C’ code for these kinds of tasks.

Control Systems Simulation Using Matlab and Simulink

CONSTANTS, CONVERSIONS, and CHARACTERS

Combinationalcomponents

Combinationalcircuits

MICROWAVE COAXIAL CONNECTORS

Circulat

System Components

Course Objectives

Overview