ADC’s InterReach® Office suite of wireless solutions enables a high-quality, service-rich mobile environment optimized for the enterprise. InterReach Office leverages ADC’s extensive in-building wireless experience and incorporates innovative GSM radio and core network technologies.

The design of disconnection modules provides a clean front panel. The insulation displacement contacts for the wire and the disconnection spring contacts are recessed inside the module, so accidental contact of the module with a metallic tool like a screwdriver will not cause any short circuits.

Reducing up-front expenses in any FTTP architecture plays into every decision a carrier makes about solutions deployed in any particular situation. Reaching customers quickly and easily with robust, flexible, and reliable connectivity for delivering voice, data, and video services requires careful planning and good decision making. The introduction of hardened connectors and drop cables using multiport service terminals (MSTs) enables carriers to accelerate FTTP deployment, provide rapid service turn-up and enable operational cost savings throughout the life of the network....

Impedance matched for use in TrueNet® structured cabling systems; these CopperTen® termination block patch cords exceed all performance requirements for Augmented Category 6. These cords allow direct patching capability between CopperTen 8-pair and 20-pair blocks or patching from a CopperTen termination block to an active device or an RJ45 patch panel. The plug is designed with integrated strain relievers that prevent the cable from moving at the termination point when the cable is flexed, safeguarding circuit integrity and guaranteeing maximum performance....

Reduced bend radius fiber products are making their presence felt across the fiber-optic telecommunication industry. The main benefit of these new fibers is their ability to bend more tightly than their traditional counterparts with no discernable increase in attenuation. This characteristic enables easier fiber installation, particularly inside structures, promising many new applications for fiber-to-the-home (FTTH) architectures. These fibers will likely have the most dramatic affect within the multiple dwelling unit (MDU) environments....

ADC’s new OmniReach® Rapid Fiber System is designed to eliminate the unique challenges posed by today’s Multiple Dwelling Unit (MDU) buildings, when deploying FTTX networks. MDU buildings present service providers with diverse challenges such as varying cable pathways and distances between logical distribution points, demanding installation schedules and increased quality risks due to splicing. ADC’s Rapid Fiber system is designed specifically to assist service providers when deploying MDU optical fiber distribution networks for a variety of architectures—and do so in less time and with less total cost on a consistent, high quality basis for every building....

Cousins Properties is one of the country’s top diversified development companies, with property management and development focused on fast-growing Sunbelt states like Florida, Georgia, Texas, and California. Founded by Thomas G. Cousins, the company has been publicly traded since 1962 and is currently listed on the New York Stock Exchange under the ticker symbol CUZ.

As mobile usage continues to increase, service providers are faced with the challenge of optimizing and expanding their wireless networks to provide new and existing services. ADC’s ClearGain® Cell Site Amplifiers minimize the cost of network expansion and improve quality of service (QoS), allowing service providers to increase profitability. ClearGain Cell Site Amplifiers improve signal quality by boosting the uplink signal of a mobile system to increase receiver performance and improve overall coverage....

Some monumental breakthroughs have taken place in optical fiber cables and their ability to bend around sharp corners without increasing attenuation – but today’s technicians and installers may be receiving mixed messages. This paper will highlight the potential issues surrounding these new fibers as they apply to the people who handle and install the cables in fiber-to-the-premise (FTTP) applications.

The goal for bringing the promise of fiber to residential subscribers is to install flexible and reliable fiber-to-the-premise (FTTP) architectures at the lowest possible cost. Plug-and-play architectures provide significant advantages, such as reducing the need for highly-skilled technicians to perform installation tasks and enabling easy access to facilitate maintenance and troubleshooting.

FlexWave MMW 110 is a point-to-point millimeter wave transmission system that operates in the licensed 71 GHz to 86 GHz spectrum and provides fiber-speed wireless Line of Sight (LOS) communications links within a 1 – 6 km range. The MMW 110 features a 10” lens making the product suitable to mount on electric poles and any other medium without the restrictions of high pointing stability. The MMW 110 has the largest beam width allowed by the FCC in the 71-86 GHz band (1.2 deg.).

The LoopStar 800/1600/3600 SONET System can be viewed as complicated to configure with many individual parts. This document provides a configuration outline with simple, easy to follow steps to assist in the configuration of a LoopStar SONET System. Using the LoopStar Parts Price List and this outline, users should be able to configure and quote a LoopStar 800/1600/3600 SONET System.

Deploying optical fiber throughout mid-and high-rise multiple dwelling unit (MDU) buildings presents service providers with a mixture of challenges due to the inescapable fact that each MDU building is unique. Cable pathways and distances between logical distribution points vary from building to building, a situation that complicates materials ordering and lengthens installation efforts. Even though the building owner views fiber to each living unit as a tremendous benefit to attract and retain tenants or unit owners, the reality is that the owner really wants the installation team in and out of the building as quickly as possible....

The ProPatch® Miniature (PPM) Series is an all new Super High-Density Coax (SHDC) patching system designed for High Definition (HD), SDI, AES audio, 5.1 and 7.1 audio applications where coax medium is preferred but space is at a premium. The system is available in both 1 and 1.5 rack unit configurations. The 1 rack unit panel features a patent-pending pullout designation strip that dramatically increases space for text, and a high-density 2x48 circuit configuration of ports. The 1.5 rack unit panel features 4x48 ports....

GPON is a culmination of the best in BPON and EPON techniques. Most agree that eventually, everything will move to IP (voice over IP, video over IP, robust data applications like gaming, video streaming, MPEG3 downloads), and quadruple play applications (network appliances, security, video surveillance). The advantages of GPON are key in driving commitment by the large volume carriers to the GPON standard. As GPON moves to become the standard of choice for fiber-to-the-premise (FTTP) networks, cost reductions and inter-operability will accelerate....

Designed to make the most of your fiber network, ADC’s FMT Drawers for MicroVAM modules add flexibility and functionality to the optical transport system. This versatile platform lays the foundation for the optical distribution frame of the future, enabling service providers to easily incorporate optical components into the network.

Tham khảo tài liệu 'copperten® modular jack', công nghệ thông tin, phần cứng phục vụ nhu cầu học tập, nghiên cứu và làm việc hiệu quả

The introduction of the Internet in the mid 1990s revolutionized the telecommunications industry. Voice, data, video, security, and building management systems that once operated as separate analog systems have now become digitally based, allowing all forms of communication traffic to converge over a common infrastructure using Internet Protocol (IP) technology.

ADC’s FlexWave™ Universal Radio Head (URH) is the most flexible, scalable and complete solution for addressing coverage and capacity needs for current and emerging wireless networks. The URH improves wireless network coverage and capacity by extending services from existing cell sites, to hard-to-reach areas by distributing coverage from a centralized radio suite.

The choice between angle-polished connectors (APCs) and ultra-polished connectors (UPCs) can make a significant impact on how a particular network will perform. There are several considerations to make, including the network design or purpose and the types of services that will be transported over the fiber. This paper will compare and contrast these two categories of connectors, highlighting their differences in terms of physical appearance, insertion loss and return loss characteristics, as well as their overall performance in particular applications....